Dyse – Transversal Fatcap
6,00 kr inkl. mva
Ligner på transversal cap, men med en bredere linje og en sterkere flyt.
Dyse som gir en skrå linje. Også kalt skrått hette, det er veldig verdsatt for utøvelse av kalligrafi, men også for fylling og fremføring av gradienter.
• Bred linje (3,5 til 9 cm) og regelmessig flyt.
• Det brukes også til å påføre visse spesifikke produkter, for eksempel lakk, og spesielt MTN PRO syntetisk lakk 400 ml.
• Passer på alle MTN spraybokser (unntatt de med male valve).
Tips:
Retningen på linjen kan endres ved å dreie den svarte delen av dysen.
160 på lager
| Vekt | 0,002 kg |
|---|---|
| Dimensjoner | 1 × 1 × 1 cm |
Universal dyse, passer til alle spraybokser. Tynn soft linjer.
AVAILABILITY: In stock
Hardcore Medium Cap, spesielt godt egnet til bruk på Hardcore 2 men passer alle andre typer MTN spraybokser; soft trykk, mellomstore linjer. Samme dyse som en orange dot fatcap.
AVAILABILITY: In stock
På Hardcore 400ml: Tjukke linjer, soft trykk.
På Alien, Molotow, MTN 94 og 2G: Medium størrelse linjer, soft trykk.
AVAILABILITY: In stock
På Hardcore 400ml: Medium størrelse linjer, soft trykk.
På Alien, Molotow, MTN 94, og 2G: Tynne linjer, soft trykk.
AVAILABILITY: In stock
«The Tinypink is a professional stencil cap which, once attached to the spray can, allows for ultra-fine lines. The spray jet, of just a few millimeters, is much more precise than with any other cap. It is the essential accessory for creating tiny details or for working in very small formats, on canvas for example. The Tinypink Stencil cap differs from the traditional Stencil cap by its paint recovery system. The excess paint no longer flows on the sprayer (and on the hands) or on the floor, the workspace is now clean. It is collected in a dedicated tank and can be reused thanks to the removable cap located at the bottom of the tank. No more waste of paint, the excess can be recycled in a marker or used with a brush for example.»
AVAILABILITY: In stock
Lik den Original Cap’en, men med en bredere linje og sterkere flyt.
Også kalt Pocket Fat Cap av Montana Colors, det gir en bred og energisk linje. Spesialistene vil sette pris på den rå gjengivelsen, ideell for konturer av graffiti eller throwups.
• Tilpasses alle MTN-bomber (unntatt bomber med hannventil).
«As you know, the Pocket Cap creates a type of line that imitates old car paint sprays: little definition but long range. However, the sophisticated pressure of today’s aerosol cans means that the projection of paint produced by the Pocket Cap doesn’t have the same result as that of those archaic high pressure paint sprays.
Fine tuning this outcome is the Pocket Fat Cap‘s mission. This nozzle perfectly reproduces the “oldschool” effect of primitive spray paint, giving a retro look to graffiti pieces, as well as energy and freshness to throw-ups. Plus, the power of its paint flow really streamlines the letter tracing process.»
AVAILABILITY: In stock
På Hardcore 400ml: Ultra tjukke linjer, veldig høy trykk.
På Alien, Molotow, MTN 94 og 2G: Veldig tjukke linjer, høy trykk.
AVAILABILITY: In stock
«VORTEX STING MALE cap is a specialized tool that allows you to paint higher spots. The extended 14cm tube allows you to reach up to 4m high from the ground. Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock
Mellom-store til tynne linjer. Passer alle type spray.
«Straight from the USA we present the LEGO CAP.
This cap, together with its older brother the New York Fat, is intended for all the most classic cap lovers.
Its medium line is ideal for outlining letters and adding details. The Lego Cap is compatible with all the MTN products.»
AVAILABILITY: In stock
Transfer Cap brukes hovedsakelig til å overføre maling fra aerosolen til en beholder (for eksempel en sprayhette). Malingen som dermed er samlet, kan deretter brukes med en børste. Spesielt anbefalt for bruk med MTN Water Based, børstene kan skylles med vann.
Ellers oppfører denne dysen seg på samme måte som en Ultraskinny / Needle Cap: høy flyt og tynn linje. Når opp til nye høyder.
Passer på alle MTN spraybokser (unntatt de med «male valve» som f.eks Madmaxxx)
AVAILABILITY: In stock
«Our Medium Touch ( Aqua ) Actuator retains rigidity in it’s trigger and offers some bounce in it’s characteristic. Our all rounder of the family and great on all valve systems to help avoid strain while offering greater control and half nozzle pressure consistently.»
AVAILABILITY: In stock
THE WORLDS WIDEST CAP!
HYDRA (Version 2) is the new standard in ULTRA wide caps. Specifically designed for high pressure cans like Mad Maxxx, Ultra wide, Turbo 750ml and Booster 600ml spray cans.
The cap fits 4mm male valves such as ultra wide cans (Mad Maxx/Ultra Wide/Booster) etc.
Get your fill done 4 times faster.
Coverage: 50-95 cm wide with even coverage.
* This product is solvent resistant and designed to be re used 100’s of times after cleaning.
Please note “HYDRA” does not come with a spigot as it is NOT compatible with female cans.
AVAILABILITY: In stock
«VORTEX HALO male cap is like no other cap and produces the worlds largest hollow cone spray pattern with a width ranging from 5-35cm. Move 3.5 X faster than any other round fat cap on the market to get any artwork done quicker.
Only suitable with high pressure cans and is recommended for 600ml female spray paint.
Compatible on all European female values with high pressure valves.
- Not suitable for use with any adapters.
- Vortex Halo needs to be cleaned between use for the best outcome by soaking in acetone or solvent liquid. For ease of cleaning we suggest a solvent cleaning can and to turn upside down and clear with the cans gas.
- Note- Weather and temperature will directly effect the pressure of a can and some low temperatures below 15 degrees celcius may cause mixed results depending on the brand of paint used.
Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock
The Cream Super Skinny cap produces a very fine line that makes them great for details and have a low pressure valve so they are easy to handle.
AVAILABILITY: In stock
BIG Shotty (Version 2) is an ultra wide fan jet cap designed for female cans with low-medium pressure.
This cap fits all popular female cans and comes with a detachable brass spigot (Stem) that allows it to fit onto male cans with 4mm spigot, such as the MTN Madmaxxx 750ml cans.
Get your fill done in half the time without wasting paint.
* Coverage: 25-40 cm wide even coverage on female cans.
* This product is solvent resistant and designed to be reused and cleaned.
AVAILABILITY: In stock
«Lightning is our widest male cap with a range from 20cm -65cm width using female cans.
For the best output it is recommended to use high pressure cans.
Wider, faster, with comfort to get your painting done in half the time. Premium engineer grade plastic and re useable. The design and comfort are 2nd to none and offer an unparalleled experience.
Cleans easily in acetone and regular solvent.»
* This product is solvent resistant and designed to be reused and cleaned.
AVAILABILITY: In stock