Dyse – Transfer Cap
6,00 kr inkl. mva
Transfer Cap brukes hovedsakelig til å overføre maling fra aerosolen til en beholder (for eksempel en sprayhette). Malingen som dermed er samlet, kan deretter brukes med en børste. Spesielt anbefalt for bruk med MTN Water Based, børstene kan skylles med vann.
Ellers oppfører denne dysen seg på samme måte som en Ultraskinny / Needle Cap: høy flyt og tynn linje. Når opp til nye høyder.
Passer på alle MTN spraybokser (unntatt de med «male valve» som f.eks Madmaxxx)
44 på lager
| Vekt | 0,004 kg |
|---|---|
| Dimensjoner | 1 × 1 × 1 cm |
På Hardcore 400ml: Ultra tynne linjer, høy/hard trykk.
På Alien, Molotow, MTN 94 og 2G: Ultra tynne linjer, høy/hard trykk.
AVAILABILITY: In stock
Tynneste mulige linjer (noen millimeter bare), settes direkte på sprayboksen.
(Husk å ta av farge-greie / donut rundt boksen) Kan brukes igjen og igjen.
AVAILABILITY: In stock
På Hardcore 400ml: Veldig tjukke linjer, hard/høy trykk.
På Alien, Molotow, MTN 94 og 2G: Veldig tjukke linjer, høy trykk.
AVAILABILITY: In stock
«Lightning is our widest male cap with a range from 20cm -65cm width using female cans.
For the best output it is recommended to use high pressure cans.
Wider, faster, with comfort to get your painting done in half the time. Premium engineer grade plastic and re useable. The design and comfort are 2nd to none and offer an unparalleled experience.
Cleans easily in acetone and regular solvent.»
* This product is solvent resistant and designed to be reused and cleaned.
AVAILABILITY: In stock
Ligner på transversal cap, men med en bredere linje og en sterkere flyt.
Dyse som gir en skrå linje. Også kalt skrått hette, det er veldig verdsatt for utøvelse av kalligrafi, men også for fylling og fremføring av gradienter.
• Bred linje (3,5 til 9 cm) og regelmessig flyt.
• Det brukes også til å påføre visse spesifikke produkter, for eksempel lakk, og spesielt MTN PRO syntetisk lakk 400 ml.
• Passer på alle MTN spraybokser (unntatt de med male valve).
Tips:
Retningen på linjen kan endres ved å dreie den svarte delen av dysen.
AVAILABILITY: In stock
Transfer Cap brukes hovedsakelig til å overføre maling fra aerosolen til en beholder (for eksempel en sprayhette). Malingen som dermed er samlet, kan deretter brukes med en børste. Spesielt anbefalt for bruk med MTN Water Based, børstene kan skylles med vann.
Ellers oppfører denne dysen seg på samme måte som en Ultraskinny / Needle Cap: høy flyt og tynn linje. Når opp til nye høyder.
Passer på alle MTN spraybokser (unntatt de med «male valve» som f.eks Madmaxxx)
AVAILABILITY: In stock
Avhengig av type og trykk på sprayboksen – Tjukke eller Medium størrelse linjer, soft trykk.
AVAILABILITY: In stock
«Our Hard Touch ( Kryptonite ) Actuator has the most rigid trigger of our family, which gives you the greatest leverage over any nozzle. This equates to around half of the pressure applied to depress a nozzle (spray) and is best used to avoid strain while blocking out large areas. Fantastic on hard valve systems and problematic nozzles.»
AVAILABILITY: In stock
«Our Soft Touch ( Infrared ) Actuator has the softest feeling trigger of the family with a lot of built in bounce on the finger tip. This allows you to find the balance point and hold quarter and half nozzle pressure consistently. It is great on a diverse range of nozzles and will help avoid strain. Amazing for fine details, dusting and spitting textures. It’s the airbrush of the range takes stress out of painting while injecting fun.»
AVAILABILITY: In stock
Original Cap er en klassiker som ikke kan sammenlignes med noen andre dyser. Hvis du liker skittende, trashy og såkalt «oldschool» følelse i linjene dine, er denne dysen for deg.
AVAILABILITY: In stock
The Night Quill Spray Brush Set is a specialty cap designed to produce brush-like tapered lines.
This set features:
1x Flat Liner, for medium lines;
1x Fine Liner, for thin lines;
2x Slim Darts (Green cap), can be used on its own or with the brush extension;
1x Heavy Dart (Blue cap), can be used on its own or with the brush extension.
Both the Heavy (high output) and Slim (low output) Darts come with detachable stems. These caps can be used on male (3,18 & 4mm) or female cans, and even prevent splatter and drips.
- Tip: try the Slim Dart & Fine liner extension on low pressure cans for thin, stencil sized lines.
Brush extensions allow for finer details without having to use the traditional brush, and are easy to clean with water or solvent.
- It is recommended to use these caps with water based cans, but they also work with regular solvent based cans.
AVAILABILITY: In stock
Mellom-store til tynne linjer. Passer alle type spray.
«Straight from the USA we present the LEGO CAP.
This cap, together with its older brother the New York Fat, is intended for all the most classic cap lovers.
Its medium line is ideal for outlining letters and adding details. The Lego Cap is compatible with all the MTN products.»
AVAILABILITY: In stock
«HEAVY DART is our medium fat cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to flare making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
AVAILABILITY: In stock
«Our Medium Touch ( Aqua ) Actuator retains rigidity in it’s trigger and offers some bounce in it’s characteristic. Our all rounder of the family and great on all valve systems to help avoid strain while offering greater control and half nozzle pressure consistently.»
AVAILABILITY: In stock


























