Night Quill Soft Touch
89,00 kr inkl. mva
«Our Soft Touch ( Infrared ) Actuator has the softest feeling trigger of the family with a lot of built in bounce on the finger tip. This allows you to find the balance point and hold quarter and half nozzle pressure consistently. It is great on a diverse range of nozzles and will help avoid strain. Amazing for fine details, dusting and spitting textures. It’s the airbrush of the range takes stress out of painting while injecting fun.»
7 på lager
«Night Quill tm has been developed to aid, assist and further the art forms utilising spray paint.
We provide technical and ergonomic design to manufacture a new era of art & graffiti implements.
Our desire is to bridge the gap with skill level as a beginner and offer products that give confidence and assist in the most creative artistic outcome. Having such tools will give people suffering from muscle, joint or tendon damage a chance to continue their art practice and career path.
Our products are aimed at a broad spectrum of use cases from general purpose to beginner and professional artists.
The Night Quill tm actuator gives you the opportunity to paint comfortably with both hands for a prolonged amount of time when strain sets in.
Night Quill is not a throw away product, but a tool to be taken care of and reused many times.»
| Vekt | 0,022 kg |
|---|---|
| Dimensjoner | 4 × 8 × 3 cm |
«Our Hard Touch ( Kryptonite ) Actuator has the most rigid trigger of our family, which gives you the greatest leverage over any nozzle. This equates to around half of the pressure applied to depress a nozzle (spray) and is best used to avoid strain while blocking out large areas. Fantastic on hard valve systems and problematic nozzles.»
AVAILABILITY: In stock
The Night Quill attaches directly to the valve of the aerosol. Direct pressure on the cap is replaced by the use of a more ergonomic trigger, which offers more amplitude while pressing less hard. The Night Quill thus allows better control of the pressure on the heading, and therefore of the flow.
Orange model: NY Low Rider. Only compatible with New York type caps, equivalent to Medium Touch. Provides pressure equivalent to half of the heading but with a trigger bounce effect. The rebound allows for a more varied flow. Compatible caps: New York fat cap and Lego cap.
Different models of Night Quill are available depending on the type of flow desired, they are available here.
The Night Quill was originally developed to allow artists with tendinitis to be able to continue spray painting without pain. But in the end it turns out to be very useful for all audiences.
• For beginners: heading control, also called can control, is one of the most complex techniques and it takes a long time to learn. The Night Quill is therefore ideal for beginners who can quickly reach the same level of skills as a professional.
• For professionals: the Night Quill is recommended for precision work, but also for long sessions: the fingers are less stressed, therefore less tired.
• For children and people with disabilities: the pressure is less strong on the Night Quill than on the cap for an identical flow. It is therefore an ideal aid for children, who find it difficult to press a cap, but also for adults who wish to continue practicing despite physical problems (tendonitis).
Installation Tips:
1. The installation of the night Quill is done on a capless spraycan.
2. Gently pull aside the black ring before placing it without forcing it on the outer ring of the valve.
3. Raise the trigger and install the chosen cap.
AVAILABILITY: In stock
«Our Medium Touch ( Aqua ) Actuator retains rigidity in it’s trigger and offers some bounce in it’s characteristic. Our all rounder of the family and great on all valve systems to help avoid strain while offering greater control and half nozzle pressure consistently.»
AVAILABILITY: In stock
«All four of our Night Quill actuators (Soft Touch, Medium Touch, Hard Touch, and Low Rider) in a discounted 4-pack.»
AVAILABILITY: In stock
Ligner på transversal cap, men med en bredere linje og en sterkere flyt.
Dyse som gir en skrå linje. Også kalt skrått hette, det er veldig verdsatt for utøvelse av kalligrafi, men også for fylling og fremføring av gradienter.
• Bred linje (3,5 til 9 cm) og regelmessig flyt.
• Det brukes også til å påføre visse spesifikke produkter, for eksempel lakk, og spesielt MTN PRO syntetisk lakk 400 ml.
• Passer på alle MTN spraybokser (unntatt de med male valve).
Tips:
Retningen på linjen kan endres ved å dreie den svarte delen av dysen.
AVAILABILITY: In stock
«The Tinypink is a professional stencil cap which, once attached to the spray can, allows for ultra-fine lines. The spray jet, of just a few millimeters, is much more precise than with any other cap. It is the essential accessory for creating tiny details or for working in very small formats, on canvas for example. The Tinypink Stencil cap differs from the traditional Stencil cap by its paint recovery system. The excess paint no longer flows on the sprayer (and on the hands) or on the floor, the workspace is now clean. It is collected in a dedicated tank and can be reused thanks to the removable cap located at the bottom of the tank. No more waste of paint, the excess can be recycled in a marker or used with a brush for example.»
AVAILABILITY: In stock
Original Cap er en klassiker som ikke kan sammenlignes med noen andre dyser. Hvis du liker skittende, trashy og såkalt «oldschool» følelse i linjene dine, er denne dysen for deg.
AVAILABILITY: In stock
«VORTEX STING FEMALE cap allows you to reach over 4.5m high from ground level with a jet stream of paint on high pressure male cans (such as MTN Madmaxxx). Reach higher with confidence. Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters, low pressure, or regular female cans.
AVAILABILITY: In stock
Lik den Original Cap’en, men med en bredere linje og sterkere flyt.
Også kalt Pocket Fat Cap av Montana Colors, det gir en bred og energisk linje. Spesialistene vil sette pris på den rå gjengivelsen, ideell for konturer av graffiti eller throwups.
• Tilpasses alle MTN-bomber (unntatt bomber med hannventil).
«As you know, the Pocket Cap creates a type of line that imitates old car paint sprays: little definition but long range. However, the sophisticated pressure of today’s aerosol cans means that the projection of paint produced by the Pocket Cap doesn’t have the same result as that of those archaic high pressure paint sprays.
Fine tuning this outcome is the Pocket Fat Cap‘s mission. This nozzle perfectly reproduces the “oldschool” effect of primitive spray paint, giving a retro look to graffiti pieces, as well as energy and freshness to throw-ups. Plus, the power of its paint flow really streamlines the letter tracing process.»
AVAILABILITY: In stock
«The GVS ELIPSE A1P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Product code: SPR341
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
The Night Quill Spray Brush Set is a specialty cap designed to produce brush-like tapered lines.
This set features:
1x Flat Liner, for medium lines;
1x Fine Liner, for thin lines;
2x Slim Darts (Green cap), can be used on its own or with the brush extension;
1x Heavy Dart (Blue cap), can be used on its own or with the brush extension.
Both the Heavy (high output) and Slim (low output) Darts come with detachable stems. These caps can be used on male (3,18 & 4mm) or female cans, and even prevent splatter and drips.
- Tip: try the Slim Dart & Fine liner extension on low pressure cans for thin, stencil sized lines.
Brush extensions allow for finer details without having to use the traditional brush, and are easy to clean with water or solvent.
- It is recommended to use these caps with water based cans, but they also work with regular solvent based cans.
AVAILABILITY: In stock
På Hardcore 400ml: Veldig tjukke linjer, hard/høy trykk.
På Alien, Molotow, MTN 94 og 2G: Veldig tjukke linjer, høy trykk.
AVAILABILITY: In stock
«HEAVY DART is our medium fat cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to flare making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
AVAILABILITY: In stock
Erstatningstupper til bruk med POSCA PC-3M og Uni Paint PX-21 tusjene.
Pakke med 3 stykker.
AVAILABILITY: In stock
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
AVAILABILITY: In stock
Erstatningstupper til bruk med POSCA PC-5M og Uni Paint PX-20 tusjene.
Pakke med 3 stykker.
AVAILABILITY: In stock