Dyse – Transfer Cap
6,00 kr inkl. mva
Transfer Cap brukes hovedsakelig til å overføre maling fra aerosolen til en beholder (for eksempel en sprayhette). Malingen som dermed er samlet, kan deretter brukes med en børste. Spesielt anbefalt for bruk med MTN Water Based, børstene kan skylles med vann.
Ellers oppfører denne dysen seg på samme måte som en Ultraskinny / Needle Cap: høy flyt og tynn linje. Når opp til nye høyder.
Passer på alle MTN spraybokser (unntatt de med «male valve» som f.eks Madmaxxx)
55 på lager
| Vekt | 0,004 kg |
|---|---|
| Dimensjoner | 1 × 1 × 1 cm |
På Hardcore 400ml: Ultra tynne linjer, høy/hard trykk.
På Alien, Molotow, MTN 94 og 2G: Ultra tynne linjer, høy/hard trykk.
AVAILABILITY: In stock
Tynneste mulige linjer (noen millimeter bare), settes direkte på sprayboksen.
(Husk å ta av farge-greie / donut rundt boksen) Kan brukes igjen og igjen.
AVAILABILITY: In stock
«VORTEX HALO male cap is like no other cap and produces the worlds largest hollow cone spray pattern with a width ranging from 5-35cm. Move 3.5 X faster than any other round fat cap on the market to get any artwork done quicker.
Only suitable with high pressure cans and is recommended for 600ml female spray paint.
Compatible on all European female values with high pressure valves.
- Not suitable for use with any adapters.
- Vortex Halo needs to be cleaned between use for the best outcome by soaking in acetone or solvent liquid. For ease of cleaning we suggest a solvent cleaning can and to turn upside down and clear with the cans gas.
- Note- Weather and temperature will directly effect the pressure of a can and some low temperatures below 15 degrees celcius may cause mixed results depending on the brand of paint used.
Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock
«HEAVY DART is our medium fat cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to flare making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
AVAILABILITY: In stock
«VORTEX STING FEMALE cap allows you to reach over 4.5m high from ground level with a jet stream of paint on high pressure male cans (such as MTN Madmaxxx). Reach higher with confidence. Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters, low pressure, or regular female cans.
AVAILABILITY: In stock
«All four of our Night Quill actuators (Soft Touch, Medium Touch, Hard Touch, and Low Rider) in a discounted 4-pack.»
AVAILABILITY: In stock
The Night Quill Spray Brush Set is a specialty cap designed to produce brush-like tapered lines.
This set features:
1x Flat Liner, for medium lines;
1x Fine Liner, for thin lines;
2x Slim Darts (Green cap), can be used on its own or with the brush extension;
1x Heavy Dart (Blue cap), can be used on its own or with the brush extension.
Both the Heavy (high output) and Slim (low output) Darts come with detachable stems. These caps can be used on male (3,18 & 4mm) or female cans, and even prevent splatter and drips.
- Tip: try the Slim Dart & Fine liner extension on low pressure cans for thin, stencil sized lines.
Brush extensions allow for finer details without having to use the traditional brush, and are easy to clean with water or solvent.
- It is recommended to use these caps with water based cans, but they also work with regular solvent based cans.
AVAILABILITY: In stock
«Our Hard Touch ( Kryptonite ) Actuator has the most rigid trigger of our family, which gives you the greatest leverage over any nozzle. This equates to around half of the pressure applied to depress a nozzle (spray) and is best used to avoid strain while blocking out large areas. Fantastic on hard valve systems and problematic nozzles.»
AVAILABILITY: In stock
«VORTEX HALO female cap is like no other cap and produces the worlds largest hollow cone spray pattern with a width ranging from 5-35cm. Move 3.5 X faster than any other round fat cap on the market to get any artwork done quicker.
Only suitable with high pressure cans and is recommended for 750ml male spray paint such as Madmaxx, Ultrawide, etc.
Compatible on all European male high pressure valves.
- Not suitable for use with any adapters.
- Vortex Halo needs to be cleaned between use for the best outcome by soaking in acetone or solvent liquid. For ease of cleaning we suggest a solvent cleaning can and to turn upside down and clear with the cans gas.
- Note- Weather and temperature will directly effect the pressure of a can and some low temperatures below 15 degrees Celsius may cause mixed results depending on the brand of paint used.
Easy to clean with any solvent based liquid and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock
På Hardcore 400ml: Medium størrelse linjer, soft trykk.
På Alien, Molotow, MTN 94, og 2G: Tynne linjer, soft trykk.
AVAILABILITY: In stock
Lik den Original Cap’en, men med en bredere linje og sterkere flyt.
Også kalt Pocket Fat Cap av Montana Colors, det gir en bred og energisk linje. Spesialistene vil sette pris på den rå gjengivelsen, ideell for konturer av graffiti eller throwups.
• Tilpasses alle MTN-bomber (unntatt bomber med hannventil).
«As you know, the Pocket Cap creates a type of line that imitates old car paint sprays: little definition but long range. However, the sophisticated pressure of today’s aerosol cans means that the projection of paint produced by the Pocket Cap doesn’t have the same result as that of those archaic high pressure paint sprays.
Fine tuning this outcome is the Pocket Fat Cap‘s mission. This nozzle perfectly reproduces the “oldschool” effect of primitive spray paint, giving a retro look to graffiti pieces, as well as energy and freshness to throw-ups. Plus, the power of its paint flow really streamlines the letter tracing process.»
AVAILABILITY: In stock
Kalligrafi dyse; kan reguleres (skru svarte-bitten) Medium størrelse linjer.
Bonus: ta ut svarte-bitten og bruk på en høy trykk boks for å nå høye steder…
AVAILABILITY: In stock
«VORTEX STING MALE cap is a specialized tool that allows you to paint higher spots. The extended 14cm tube allows you to reach up to 4m high from the ground. Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock
The Night Quill attaches directly to the valve of the aerosol. Direct pressure on the cap is replaced by the use of a more ergonomic trigger, which offers more amplitude while pressing less hard. The Night Quill thus allows better control of the pressure on the heading, and therefore of the flow.
Orange model: NY Low Rider. Only compatible with New York type caps, equivalent to Medium Touch. Provides pressure equivalent to half of the heading but with a trigger bounce effect. The rebound allows for a more varied flow. Compatible caps: New York fat cap and Lego cap.
Different models of Night Quill are available depending on the type of flow desired, they are available here.
The Night Quill was originally developed to allow artists with tendinitis to be able to continue spray painting without pain. But in the end it turns out to be very useful for all audiences.
• For beginners: heading control, also called can control, is one of the most complex techniques and it takes a long time to learn. The Night Quill is therefore ideal for beginners who can quickly reach the same level of skills as a professional.
• For professionals: the Night Quill is recommended for precision work, but also for long sessions: the fingers are less stressed, therefore less tired.
• For children and people with disabilities: the pressure is less strong on the Night Quill than on the cap for an identical flow. It is therefore an ideal aid for children, who find it difficult to press a cap, but also for adults who wish to continue practicing despite physical problems (tendonitis).
Installation Tips:
1. The installation of the night Quill is done on a capless spraycan.
2. Gently pull aside the black ring before placing it without forcing it on the outer ring of the valve.
3. Raise the trigger and install the chosen cap.
AVAILABILITY: In stock