Night Quill Heavy Dart
37,00 kr Opprinnelig pris var: 37,00 kr.29,00 krNåværende pris er: 29,00 kr. inkl. mva
«HEAVY DART is our medium fat cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to flare making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
74 på lager
| Vekt | 0,022 kg |
|---|---|
| Dimensjoner | 4 × 4 × 3 cm |
«All four of our Night Quill actuators (Soft Touch, Medium Touch, Hard Touch, and Low Rider) in a discounted 4-pack.»
AVAILABILITY: In stock
* Høy trykk for stor areal dekning; 20 forskjellige farger – blank maling
* Tykk og pigmentfull maling som dekker veldig bra
* Praktisk størrelse når mann har litt mer dårlig tid
* Den originale spanske MTN høy kvalitets maling produkt. En Pink Fatcap inkludert i prisen
«Our traditional Mega (600 ml) has been reformulated with an improved opacity, a faster dry – perfect for incoming winter conditions, 6 new colors, and a fresh restyled design.
The potent firing of the new Mega Colors with its power in covering provides a fat line most efficiently made with the Pink Fat Cap. The new qualities of our Mega Colors offers different possibilities with the rest of our MTN caps, for example the long reach you can get from combining the new can with the Needle Cap.»
* Mer info og detaljer her: MTN Mega 600ml Info
** Tips: alltid 10% avslag uansett antall når du handler fysisk i butikken HER
AVAILABILITY: In stock
«Our Hard Touch ( Kryptonite ) Actuator has the most rigid trigger of our family, which gives you the greatest leverage over any nozzle. This equates to around half of the pressure applied to depress a nozzle (spray) and is best used to avoid strain while blocking out large areas. Fantastic on hard valve systems and problematic nozzles.»
AVAILABILITY: In stock
«Our Soft Touch ( Infrared ) Actuator has the softest feeling trigger of the family with a lot of built in bounce on the finger tip. This allows you to find the balance point and hold quarter and half nozzle pressure consistently. It is great on a diverse range of nozzles and will help avoid strain. Amazing for fine details, dusting and spitting textures. It’s the airbrush of the range takes stress out of painting while injecting fun.»
AVAILABILITY: In stock
«Our Medium Touch ( Aqua ) Actuator retains rigidity in it’s trigger and offers some bounce in it’s characteristic. Our all rounder of the family and great on all valve systems to help avoid strain while offering greater control and half nozzle pressure consistently.»
AVAILABILITY: In stock
BIG Shotty (Version 2) is an ultra wide fan jet cap designed for female cans with low-medium pressure.
This cap fits all popular female cans and comes with a detachable brass spigot (Stem) that allows it to fit onto male cans with 4mm spigot, such as the MTN Madmaxxx 750ml cans.
Get your fill done in half the time without wasting paint.
* Coverage: 25-40 cm wide even coverage on female cans.
* This product is solvent resistant and designed to be reused and cleaned.
AVAILABILITY: In stock
Endelig er den tilbake! Ingen kopi, dette er den originale MTN Skinny Pro cap som gir de skarpeste og reneste tynne linjer du kunnet ønske deg. Spesielt godt egnet brukt sammen med MTN 94 spraybokser men passer alle andre bokser også.
AVAILABILITY: In stock
«SLIM DART is our variable skinny cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (male cans such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to paint tiny details from 3mm to outlines around 20mm making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
AVAILABILITY: In stock
«The Tinypink is a professional stencil cap which, once attached to the spray can, allows for ultra-fine lines. The spray jet, of just a few millimeters, is much more precise than with any other cap. It is the essential accessory for creating tiny details or for working in very small formats, on canvas for example. The Tinypink Stencil cap differs from the traditional Stencil cap by its paint recovery system. The excess paint no longer flows on the sprayer (and on the hands) or on the floor, the workspace is now clean. It is collected in a dedicated tank and can be reused thanks to the removable cap located at the bottom of the tank. No more waste of paint, the excess can be recycled in a marker or used with a brush for example.»
AVAILABILITY: In stock
«VORTEX STING FEMALE cap allows you to reach over 4.5m high from ground level with a jet stream of paint on high pressure male cans (such as MTN Madmaxxx). Reach higher with confidence. Easy to clean with any solvent based liquid or spray (for example MTN Pro Solvent) and is reusable.»
- Not compatible with adapters, low pressure, or regular female cans.
AVAILABILITY: In stock
På Hardcore 400ml: Medium størrelse linjer, soft trykk.
På Alien, Molotow, MTN 94, og 2G: Tynne linjer, soft trykk.
AVAILABILITY: In stock
«HEAVY DART is our medium fat cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to flare making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
AVAILABILITY: In stock
Erstatningstupper til bruk med POSCA PC-1MC tusjene.
Pakke med 3 stykker.
AVAILABILITY: In stock
Ligner på transversal cap, men med en bredere linje og en sterkere flyt.
Dyse som gir en skrå linje. Også kalt skrått hette, det er veldig verdsatt for utøvelse av kalligrafi, men også for fylling og fremføring av gradienter.
• Bred linje (3,5 til 9 cm) og regelmessig flyt.
• Det brukes også til å påføre visse spesifikke produkter, for eksempel lakk, og spesielt MTN PRO syntetisk lakk 400 ml.
• Passer på alle MTN spraybokser (unntatt de med male valve).
Tips:
Retningen på linjen kan endres ved å dreie den svarte delen av dysen.
AVAILABILITY: In stock
Erstatningstupper til bruk med POSCA PC-5M og Uni Paint PX-20 tusjene.
Pakke med 3 stykker.
AVAILABILITY: In stock
Hardcore Medium Cap, spesielt godt egnet til bruk på Hardcore 2 men passer alle andre typer MTN spraybokser; soft trykk, mellomstore linjer. Samme dyse som en orange dot fatcap.
AVAILABILITY: In stock
På Hardcore 400ml: Ultra tjukke linjer, veldig høy trykk.
På Alien, Molotow, MTN 94 og 2G: Veldig tjukke linjer, høy trykk.
AVAILABILITY: In stock
«VORTEX HALO female cap is like no other cap and produces the worlds largest hollow cone spray pattern with a width ranging from 5-35cm. Move 3.5 X faster than any other round fat cap on the market to get any artwork done quicker.
Only suitable with high pressure cans and is recommended for 750ml male spray paint such as Madmaxx, Ultrawide, etc.
Compatible on all European male high pressure valves.
- Not suitable for use with any adapters.
- Vortex Halo needs to be cleaned between use for the best outcome by soaking in acetone or solvent liquid. For ease of cleaning we suggest a solvent cleaning can and to turn upside down and clear with the cans gas.
- Note- Weather and temperature will directly effect the pressure of a can and some low temperatures below 15 degrees Celsius may cause mixed results depending on the brand of paint used.
Easy to clean with any solvent based liquid and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock

































