MTN Pro Vinyl Coating (Gummilakk)
135,00 kr inkl. mva
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
| Vekt | 0,5 kg |
|---|---|
| Dimensjoner | 6,5 × 6,5 × 25 cm |
| Color | Vinyl Black, Vinyl White |
Erstatnings filter holdere til bruk med 3M Pro 6000 masker.
Bruk sammen med 3M Pro 6000-7000 filtre og 3M Pro 6000-7000 støv filtre.
AVAILABILITY: In stock
3M 5925 erstatnings filtre (2 stykker) til bruk med 3M 6000 og 7000 masker. P2 beskyttelse mot partikler og støv, samt begrenset beskyttelse mot gass (A1).
* Godkjenning: P2; Normalisation EN 143.
AVAILABILITY: In stock
3M™ Reusable Half Mask 4255+ (FFA2P3 R D)
The 3M™ Reusable Half Mask 4255+ is a ready-to-use, maintenance-free respirator designed for effective and comfortable protection against organic gases and vapors, as well as hazardous particulates like those from spray paint. Its integrated cartridges and filters offer combined protection in a single, lightweight unit.
Conforms to European norm EN 405:2001+A1:2009.
Protection rating: The mask provides FFA2P3 R D protection.
A2: Protects against organic gases and vapors (with a boiling point over 65°C), such as those from solvent-based paints, adhesives, and cleaning detergents, up to 10 times the occupational exposure limit (or 5000 parts per million, whichever is lower).
P3: Offers protection against high levels of fine dust and water- or oil-based mists. This provides high filtration efficiency (99%) against airborne particulates.
R: Signifies the mask is reusable.
D: Indicates it has passed the optional Dolomite dust clogging test, which means it resists clogging under dusty conditions.
Integrated design: The filters and cartridges are integrated into the facepiece, meaning no assembly or maintenance is required before use.
Breathing comfort: A new, enhanced valve assembly helps reduce breathing resistance during exhalation, making it easier to breathe.
Silicone-free face seal: The textured face seal is soft, non-allergenic, and silicone-free for a comfortable fit.
Lightweight and balanced: The mask’s design is lightweight and well-balanced for comfortable, prolonged wear.
Heat and moisture reduction: The centrally-located exhalation valve helps reduce the build-up of heat and moisture, which is especially helpful in hot, humid conditions.
Low profile: Its streamlined profile provides a wide field of peripheral vision.
Adjustable harness: The head harness features easy-to-tighten straps to ensure a proper fit for a wide range of head shapes and sizes.
Hygienic storage: The mask comes with a resealable bag for hygienic storage and transport.
AVAILABILITY: In stock
«The fable of “The Ant and the Grasshopper” told us that in summer you have to prepare for the arrival of winter. And that’s what we do.
We present a version of our gloves for for the coldest months: the MTN PRO Gloves – Winter. Apparel especially designed to protect your hands from the cold and rain, as well as protecting them from paint stains.»
AVAILABILITY: In stock
• Shoulder bag is made of 600D polyester with waterproof backing.
• 4cm wide removable shoulder-strap.
• Main compartment can be closed with zipper.
• 2 Slide pocket in flap can be closed with Velcro.
• There are 2 slide pockets for caps in side of bag.
Size: 43,50 × 26,50 x 22cm, approx. 27 liter capacity.
Reason to use:
Holds 18 spray cans; bag is discrete black; can be closed with zipper and has hand carry straps.
AVAILABILITY: In stock
* Høy trykk for stor areal dekning; 20 forskjellige farger – blank maling
* Tykk og pigmentfull maling som dekker veldig bra
* Praktisk størrelse når mann har litt mer dårlig tid
* Den originale spanske MTN høy kvalitets maling produkt. En Pink Fatcap inkludert i prisen
«Our traditional Mega (600 ml) has been reformulated with an improved opacity, a faster dry – perfect for incoming winter conditions, 6 new colors, and a fresh restyled design.
The potent firing of the new Mega Colors with its power in covering provides a fat line most efficiently made with the Pink Fat Cap. The new qualities of our Mega Colors offers different possibilities with the rest of our MTN caps, for example the long reach you can get from combining the new can with the Needle Cap.»
* Mer info og detaljer her: MTN Mega 600ml Info
AVAILABILITY: In stock
«Balaclava is crafted from lightweight, elastic polyester, offering versatility and comfort for the user. It can be worn as a full-face mask or a half-face tunnel scarf. Providing the right coverage when needed.»
• Laser cut holes for easy breathing.
• Elastic webbing on nose for centering the front.
• Flag on back for centering the back.
• Bottom part is lower and wider on front to cover neck.
100% stretch polyester.
Size 27 x 48cm.
AVAILABILITY: In stock
«Spray can backpack ready for action.
• 600D all over printed ripstop polyester with waterproof backing.
• Main compartment and front pocket can be closed with zipper.
• Shoulder-straps are padded.
• Big carry handle on top.
• Size: 30 x 40 x 21cm, 25,2 liter capacity.
Reason to use:
Holds 12 spray cans in carton boxes, and another 12 spray cans can be stacked on top.
Plus the front pocket fits 3 spray cans. That’s a whole 27 spray cans in one backpack!»
AVAILABILITY: In stock
Montana Colors’s MTN PRO Chalk is a water-washable spray paint can, ideal for temporary marking or temporary art. Chalk has a texture similar to chalk. To erase it, nothing could be simpler since it is soluble in water. The less porous the surface, the faster the cleaning. Versatile, it is as effective for temporary signage of an event as a workshop with children. At the end, a simple sponge or basic water under pressure will take care not to leave any trace on the support.
* MTN Pro WB Chalk safety sheet: HERE (.pdf)
* Complete technical data sheet here: MTN Pro WB Chalk (.pdf)
AVAILABILITY: In stock
«The GVS ELIPSE A1P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Product code: SPR341
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
Introducing an accessory that is more useful than it sounds: being able to use an aerosol as if it were a paint spray gun avoids finger fatigue on large format projects. Plus, it also helps avoid stains on your clothes and body by keeping the spray can a little further away from you.
Sprayhandle
Recommended for applying aerosol products in a comfortable and clean way. Although we are not in favor of guns, this is the product closest to one, for this reason, the yellowness of it will help you not to have any problems of this type.
Instructions for use:
Attach the gun holder to the neck of the spray can by pushing horizontally. Before use, pull the trigger so that the aerosol lets out a little gas. Do not point it at yourself.
Attention:
When attaching or removing the accessory, do not apply force at an angle as the holder may break.
* Technical Sheet – Check here
AVAILABILITY: In stock
MTN Kids Apron er perfekt tilpasset barn. (6-9 størrelsen passer også selvfølgelig på yngre kunstnere)
AVAILABILITY: In stock