3M PRO 6000-7000 Støv Filtre (2 stykker)
129,00 kr inkl. mva
3M 5925 erstatnings filtre (2 stykker) til bruk med 3M 6000 og 7000 masker. P2 beskyttelse mot partikler og støv, samt begrenset beskyttelse mot gass (A1).
* Godkjenning: P2; Normalisation EN 143.
2 på lager
| Vekt | 0,02 kg |
|---|---|
| Dimensjoner | 3 × 3 × 4 cm |
3M™ Reusable Half Mask 4255+ (FFA2P3 R D)
The 3M™ Reusable Half Mask 4255+ is a ready-to-use, maintenance-free respirator designed for effective and comfortable protection against organic gases and vapors, as well as hazardous particulates like those from spray paint. Its integrated cartridges and filters offer combined protection in a single, lightweight unit.
Conforms to European norm EN 405:2001+A1:2009.
Protection rating: The mask provides FFA2P3 R D protection.
A2: Protects against organic gases and vapors (with a boiling point over 65°C), such as those from solvent-based paints, adhesives, and cleaning detergents, up to 10 times the occupational exposure limit (or 5000 parts per million, whichever is lower).
P3: Offers protection against high levels of fine dust and water- or oil-based mists. This provides high filtration efficiency (99%) against airborne particulates.
R: Signifies the mask is reusable.
D: Indicates it has passed the optional Dolomite dust clogging test, which means it resists clogging under dusty conditions.
Integrated design: The filters and cartridges are integrated into the facepiece, meaning no assembly or maintenance is required before use.
Breathing comfort: A new, enhanced valve assembly helps reduce breathing resistance during exhalation, making it easier to breathe.
Silicone-free face seal: The textured face seal is soft, non-allergenic, and silicone-free for a comfortable fit.
Lightweight and balanced: The mask’s design is lightweight and well-balanced for comfortable, prolonged wear.
Heat and moisture reduction: The centrally-located exhalation valve helps reduce the build-up of heat and moisture, which is especially helpful in hot, humid conditions.
Low profile: Its streamlined profile provides a wide field of peripheral vision.
Adjustable harness: The head harness features easy-to-tighten straps to ensure a proper fit for a wide range of head shapes and sizes.
Hygienic storage: The mask comes with a resealable bag for hygienic storage and transport.
AVAILABILITY: In stock
«The GVS ELIPSE A2P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of up to 5000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140 : 1998, EN 405, EN14387 RD+A2 With P3 APF: 40. With Gas or Gas A2+P3: 20.
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
AVAILABILITY: In stock
MTN WEPRO Clear Coat varnish is made with solvent-based thermoplastic acrylic resins. Ultra-fast drying, its main function is to protect and protect different surfaces.
It can be applied for indoor and outdoor use on a multitude of materials in order to increase surface protection in two finishes: glossy or matte.
Different finishes will be obtained depending on the number of layers applied. Completely transparent and does not yellow.
* Complete technical data sheet here: MTN WEPRO ACRYLIC VARNISH
AVAILABILITY: In stock
Spray can backpack ready for action.
• Metro backpack is made of 500D polyester with waterproof backing.
• Main compartment and front pocket can be closed with zipper.
• Back-panel, bottom and shoulder-straps are padded.
• Big carry handle on top.
• Size: 30 x 40 x 21cm, 25 liter capacity.
Reason to use:
Holds 12 spray cans in carton boxes, and another 12 spray cans can be stacked on top.
Also the front pocket fits 3 spray cans.
That’s 27 spray cans in one backpack!
AVAILABILITY: In stock
Artists know that the aging and denaturing of a work is often caused by humidity and UV rays. MTN WEPRO Outdoor Varnish now offers the best protection against temperature and light changes, in a non toxic water-based acrylic variant. The surface is maintained as it was on the first day and this for many years. The varnish is compatible with most paints on the market but also with pencil, chalk, charcoal and other watercolors.
* Complete technical data sheet here: MTN WEPRO OUTDOOR VARNISH
AVAILABILITY: In stock
Erstatnings filter holdere til bruk med 3M Pro 6000 masker.
Bruk sammen med 3M Pro 6000-7000 filtre og 3M Pro 6000-7000 støv filtre.
AVAILABILITY: In stock
- Velegnet til merking, midlertidig forsegling/bunting og maskering.
- Etterlater ikke spor ved kortvarig bruk.
- Er vannfast og kleber til alle slags underlag.
«Maskeringstape fra Rajapack er allsidig og har mange bruksområder.
Praktisk: maskeringstapen kleber til alle slags underlag, er vannfast og tåler opptil +60˚C i inntil 30 minutter. Rives av for hånd.
Allsidig: Maskeringstapen er velegnet til merking av metall- og plastdeler, maskering før maling, overflatebeskyttelse eller til bunting av lettere gjenstander. Maskeringstapen etterlater ikke spor ved kortvarig bruk inntil 24 timer.
Tykkelse: 0,12 mmKlebeevne: 1,7 N/cm (gummibasert lim) Elastisitet: 8,5 %»
– Velg ønsket størrelse under – 19mm x 50m, 25mm x 50m, eller 50mm x 50m
AVAILABILITY: In stock
«This unique product has the weight and feel of a real can, complete with rattling noise. Made of high grade aluminum with a rubber seal this can is the perfect place to hide your valuables in plain sight. From the outside, your first impression is that this is just a regular Hardcore spray can, but on the inside, instead of paint it has a hidden spacious compartment, to hide those things that are best left hidden from view. Made in Europe from an authentic spray can, The Pandora not only deceives you due to its appearance, but also because it makes the classic sound of a rattling can and weighs the same as a regular can. No matter how you handle The Pandora, it is absolutely impossible to notice its true nature. Provided empty.»
* Limited edition MTN Hardcore Stash Can
* Looks and feels like a real spray paint can
* Made in Europe from a real spray paint can
* Hidden air-tight compartment for stashing valuables
* Bottom is removable for stash spot
– Ta en titt i pdf filen
AVAILABILITY: In stock
Mr. Serious ‘PU coated winter gloves’
These gloves are painting gloves like we are used to but with ‘terry liner’ to keep hands warm, even in sub zero conditions. Tilgjengelig i størrelser L, og XL.
AVAILABILITY: In stock
«The GVS ELIPSE A1P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Product code: SPR341
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
• Shoulder bag is made of 600D polyester with waterproof backing.
• 4cm wide removable shoulder-strap.
• Main compartment can be closed with zipper.
• 2 Slide pocket in flap can be closed with Velcro.
• There are 2 slide pockets for caps in side of bag.
Size: 43,50 × 26,50 x 22cm, approx. 27 liter capacity.
Reason to use:
Holds 18 spray cans; bag is discrete black; can be closed with zipper and has hand carry straps.
AVAILABILITY: In stock