MTN Waterbased 100ml
49,00 kr inkl. mva
MTN Waterbased 100 har alt som gjorde suksessen til WB400 men nå i miniatyrformat.
Giftfri, lett og svært enkel i bruk, MTN Waterbased 100 er ideell for workshops og kunst maling med barn. Størrelsen passer perfekt inn i deres hender. Men bruken stopper ikke der; disse boksene er også godt egnet for artister, fagfolk og DIY entusiaster som ønsker å bruke en liten mengde maling og unngå å fylle sine hyller med halvtomme bokser.
* Sikkerhetsdatablad og mer info på Norsk finner du her: MTN WB-100ml MSDS
* Mer info og detaljer her eller i produkt beskrivelsen under: MTN Waterbased 100ml
Som for WB400, blir oppløsningsmidlene av petroleum eller metylal erstattet av en vannbasert blanding. Malingen med pigmenter av meget høy kvalitet holder bedre over tid enn konvensjonell spraymaling, og en gang helt tørt er selvsagt umulig å fjerne. Waterbased produktene gir veldig lav lukt også så det er mindre sjenerende for andre.
Den WB100 er respekt for helsen til brukeren, samtidig som den tilbyr en sprayboks med samme skarp ytelse som den klassiske MTN 94. Luktfri og uten skadelige løsemidler, er det perfekt egnet til kunstnere, malere og dekoratører som ønsker å jobbe like lett innendørs som utendørs, uten nødvendigvis å ty til en maske for beskyttelse mot gass (så lenge området er ventilert nok)
Imidlertid kan en lang tørketid også være en fordel i Fine Arts feltet, for å arbeide hans verker ved å blande fargene med et verktøy. Det er selvfølgelig mulig med MTN Waterbased; malingen er ikke endelig fastslått inntil ca 20 minutter.
Helt produsert i Barcelona, Spania, er WB100 trofast til de miljømessige og sosiale etikk som karakteriserer Montana Colors. Komponentene i malingen er miljøvennlig og utelukkende fra Europa.
Tekniske spesifikasjoner:
• Matt finish
• Lavere trykk for optimal nøyaktighet
• 100 ml format
• «Antikoagulasjon» ventil hindrer over-tettet dyser
• Malingsflekker kan fjernes med såpe og varmt vann i de første 20 til 25 minutter etter påføring.
• Når malingen er tørr er den 100% slitesterk og vanntett
• Kompatibel med alle overflater, inkludert polystyren (ideelt for å lage modeller)
• Etikett med all informasjon: relasjonen til andre MTN referanser, Pantone koden, pigment innhold, CMYK og RGB referansene, UV grad, og lignende farger i serien.
| Vekt | 0,13 kg |
|---|---|
| Dimensjoner | 5 × 5 × 10 cm |
Reusable, heavyweight cardboard stencils that provide great resistance and durability.
Suitable for all types of indoor and outdoor decorations.
An ideal complement to the Water Based 100ml / 300ml.
AVAILABILITY: In stock
400ml sprayboks – innendørs og utendørs vann-basert akryl matt maling; variabelt / lav (MTN94 system) trykk for optimal kontroll og enklest mulig bruk.
Vask bort flekker og søl innen 20 minutter med varmt vann og såpe. 100% permanent og vannavstøtende etter å ha tørket.
Tilgjengelig i 91 farger, matt finish.
Tips: ikke la dysene være igjen på boksene etter bruk. Snu boksen opp ned og trykk på dysen til det er bare gass som kommer ut. Dette gjør at dysen varer lengre og ikke tetter seg etter bruk.
- OBS – Det er anbefalt å ikke legge til mer enn 10 forskjellige farger i handlekurven av gangen.
* Material Safety Sheet – HERE
* Technical Data Sheet – HERE
AVAILABILITY: In stock
Waterbased 200ml refill for use with all markers but especially recommended with Waterbased 3mm and 5mm markers.
«Montana Colors presents a water-based marker range and refill cartridges that are ideal for artwork, crafts, and
fine arts. They are fully compatible with our Water Based spray paint, as well as with most fine arts products (acrylics and solvent-based Montana Colors aerosols)
In addition, we’re introducing 18 refill cartridges in a 200ml format. The highest quality paint that’s useful for much more than refilling because it may be applied using any technique, such as: paint brushes, dabbers, airbrush… All colors are mixable with one another and may be diluted with water to achieve glaze effects. Components can be cleaned with water while they are still wet.
Recommended especially for drawing and painting on wood, paper, glass, metals, and clothing among other surfaces. May also be used on MTN Systems.»
* Sjekk mer info og bilder her: MTN Markers and Paint (.pdf engelsk)
AVAILABILITY: In stock
Radex FFP3 støvmaske uten ventil gir minst 99% filtrering! Godt egnet for arbeid med helsefarlige partikler, asbest, sveiserøyk, spraymaling og farlige kjemikalier. Farge: hvit.
AVAILABILITY: In stock
MTN Marcador 2mm; vannbasert akryl maling.
The MTN Acrylic Marcador is a felt tip high opacity water-based paint marker. Suitable for practically all types of surfaces, the only limit to its use is your imagination!
The paint in these markers has excellent opacity, quickly dries to the touch and is totally dry within 24 hours, depending on the surface. Once dry, it offers great resistance to light and water, has no odor and is xylene free.
The markers can be refilled with MTN Water Based Paint, or any other paint or ink. Their tips are also replaceable so the useful life of these tools can be extended indefinitely. You won’t have to buy them again and you’ll generate less waste!
– View the Technical Data Sheet HERE
AVAILABILITY: In stock
Montana Colors’s MTN PRO Chalk is a water-washable spray paint can, ideal for temporary marking or temporary art. Chalk has a texture similar to chalk. To erase it, nothing could be simpler since it is soluble in water. The less porous the surface, the faster the cleaning. Versatile, it is as effective for temporary signage of an event as a workshop with children. At the end, a simple sponge or basic water under pressure will take care not to leave any trace on the support.
* MTN Pro WB Chalk safety sheet: HERE (.pdf)
* Complete technical data sheet here: MTN Pro WB Chalk (.pdf)
AVAILABILITY: In stock
«New, decorative stencils for crafts and workshops. An ideal complement to Water Based 100/400 or MTN 94.
Reusable, heavyweight cardboard stencils that provide great resistance and durability. Suitable for all types of indoor and outdoor decorations. An ideal complement to the new Water Based 100ml and 400ml. Format A4 – sold individually.»
* Mer info her (.pdf)
AVAILABILITY: In stock
Radex FFP2 støvmaske uten ventil gir effektiv beskyttelse mot støv, partikler og aerosoler. Ideell for bygg, industri og verksted. Komfortabel maske med høy filtrering for krevende arbeidsmiljøer. Farge: hvit.
AVAILABILITY: In stock
Quick drying water-based varnish in a glossy or matte finish with excellent characteristics, designed to protect and even out the finish of artistic murals, both outdoors and indoors. Thanks to its UV filter, it significantly increases the life span of the outdoor murals exposed to the sun.
We recommend diluting the product with 5-15% water depending on the type of application after carrying out a previous test on your surface to check that the product is suitable for your requirements. Its yield is 15 m²/l.
* View MTN Mural Technical Data Sheet HERE
* View MTN Mural Material Safety Sheet HERE
AVAILABILITY: In stock
«The GVS ELIPSE A1P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Product code: SPR341
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
The MTN WEPRO Multi-Surface Primer is a primer spray that also works as a final coat. The primer enhances the adherence of paint to glossy surfaces – from plastics such as rigid PVC and methacrylate to metals such as aluminum, copper or zinc; as well as other materials such as glass, ceramic and tiles. This versatile product can also be used as a finishing paint, as it can be later enameled or varnished.
– White
– Anti-rust prevention
– Fast drying
– Resistant to temperatures of up to 100 ºC
– Strong adhesion to any Surface
– Indoor and outdoor use
AVAILABILITY: In stock
- Velegnet til merking, midlertidig forsegling/bunting og maskering.
- Etterlater ikke spor ved kortvarig bruk.
- Er vannfast og kleber til alle slags underlag.
«Maskeringstape fra Rajapack er allsidig og har mange bruksområder.
Praktisk: maskeringstapen kleber til alle slags underlag, er vannfast og tåler opptil +60˚C i inntil 30 minutter. Rives av for hånd.
Allsidig: Maskeringstapen er velegnet til merking av metall- og plastdeler, maskering før maling, overflatebeskyttelse eller til bunting av lettere gjenstander. Maskeringstapen etterlater ikke spor ved kortvarig bruk inntil 24 timer.
Tykkelse: 0,12 mmKlebeevne: 1,7 N/cm (gummibasert lim) Elastisitet: 8,5 %»
– Velg ønsket størrelse under – 19mm x 50m, 25mm x 50m, eller 50mm x 50m
AVAILABILITY: In stock
Et par sorte engangshansker av sterk nitril i høy kvalitet, uten latex og silikon. L Størrelse passer de fleste.
AVAILABILITY: In stock
«The fable of “The Ant and the Grasshopper” told us that in summer you have to prepare for the arrival of winter. And that’s what we do.
We present a version of our gloves for for the coldest months: the MTN PRO Gloves – Winter. Apparel especially designed to protect your hands from the cold and rain, as well as protecting them from paint stains.»
AVAILABILITY: In stock
Montana Colors forbedrer konseptet med Tote bag for graffiti artister:
• Spesielt designet for å transportere 12 spraybokser (400 eller 600 ml).
• Svært motstandsdyktig svart nylon.
• Diskret.
– Tips:
For enkel og mer stabil transport av sprayboksene, anbefaler vi at du legger to esker i posen (se bilde)
AVAILABILITY: In stock
100% stretch polyester.
Size 24 x 47cm.
AVAILABILITY: In stock
The Mr. Serious 18-pack bag holds enough cans for a big sized production.
• Non woven fabric.
• Strong 4cm handles.
• Fits 18 spray cans.
• Size: 43,5 × 26,5 x 22cm.
• 2 slide pockets in flap and 6 slide pockets for caps in bag.
Reason to use:
Holds enough cans for a big sized production, cans won’t tip over if cardboard boxes are used, bag is discrete in matt black, can be closed with zip, reusable.
AVAILABILITY: In stock
Erstatnings filter holdere til bruk med 3M Pro 6000 masker.
Bruk sammen med 3M Pro 6000-7000 filtre og 3M Pro 6000-7000 støv filtre.
AVAILABILITY: In stock
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
AVAILABILITY: In stock
Introducing an accessory that is more useful than it sounds: being able to use an aerosol as if it were a paint spray gun avoids finger fatigue on large format projects. Plus, it also helps avoid stains on your clothes and body by keeping the spray can a little further away from you.
Sprayhandle
Recommended for applying aerosol products in a comfortable and clean way. Although we are not in favor of guns, this is the product closest to one, for this reason, the yellowness of it will help you not to have any problems of this type.
Instructions for use:
Attach the gun holder to the neck of the spray can by pushing horizontally. Before use, pull the trigger so that the aerosol lets out a little gas. Do not point it at yourself.
Attention:
When attaching or removing the accessory, do not apply force at an angle as the holder may break.
* Technical Sheet – Check here
AVAILABILITY: In stock














































