Radex FFP3 Støvmaske
35,00 kr inkl. mva
Radex FFP3 støvmaske uten ventil gir minst 99% filtrering! Godt egnet for arbeid med helsefarlige partikler, asbest, sveiserøyk, spraymaling og farlige kjemikalier. Farge: hvit.
På lager
Filtrerende halvmaske som beskytter mot både grovt og fint støv i lufta, samt biologiske aerosoler som virus og bakterier.
Masken beskytter mot både faste partikler og partikler i væskeform, og filtrerer minst 99% av partikler større enn 0,3µm.
Egner seg godt for bruk i miljøer med støv fra tre, betong, gips og glassfiber, eller ved sanering av mugg. Den beskytter også mot finstøv, svevestøv og høyrisikopartikler innenfor industri, bygg, gruvedrift, og lakkverksted, og tåker fra metall og olje, samt aerosoler og luftveisvirus som influensa og COVID-19.
Masken egner seg ikke som beskyttelse mot gasser, damp og oksider, som nitrogenoksid.
Masken er godkjent i henhold til EN 149:2001+A1:2009. Den er CE-merket, og er ypperlig for bruk på byggeplass, i industrimiljøer med farlig svevestøv som sement, metall, maling eller mineraler, på versted, ved saging, sliping og pussing, i helsesektoren ved håndtering av smittsomme aerosoler. Den har høy hygienisk verdi ved at ingen utåndingsluft slippes ufiltrert ut.
| Vekt | 0,002 kg |
|---|
Montana Colors’s MTN PRO Chalk is a water-washable spray paint can, ideal for temporary marking or temporary art. Chalk has a texture similar to chalk. To erase it, nothing could be simpler since it is soluble in water. The less porous the surface, the faster the cleaning. Versatile, it is as effective for temporary signage of an event as a workshop with children. At the end, a simple sponge or basic water under pressure will take care not to leave any trace on the support.
* MTN Pro WB Chalk safety sheet: HERE (.pdf)
* Complete technical data sheet here: MTN Pro WB Chalk (.pdf)
AVAILABILITY: In stock
3M™ Reusable Half Mask 4255+ (FFA2P3 R D)
The 3M™ Reusable Half Mask 4255+ is a ready-to-use, maintenance-free respirator designed for effective and comfortable protection against organic gases and vapors, as well as hazardous particulates like those from spray paint. Its integrated cartridges and filters offer combined protection in a single, lightweight unit.
Conforms to European norm EN 405:2001+A1:2009.
Protection rating: The mask provides FFA2P3 R D protection.
A2: Protects against organic gases and vapors (with a boiling point over 65°C), such as those from solvent-based paints, adhesives, and cleaning detergents, up to 10 times the occupational exposure limit (or 5000 parts per million, whichever is lower).
P3: Offers protection against high levels of fine dust and water- or oil-based mists. This provides high filtration efficiency (99%) against airborne particulates.
R: Signifies the mask is reusable.
D: Indicates it has passed the optional Dolomite dust clogging test, which means it resists clogging under dusty conditions.
Integrated design: The filters and cartridges are integrated into the facepiece, meaning no assembly or maintenance is required before use.
Breathing comfort: A new, enhanced valve assembly helps reduce breathing resistance during exhalation, making it easier to breathe.
Silicone-free face seal: The textured face seal is soft, non-allergenic, and silicone-free for a comfortable fit.
Lightweight and balanced: The mask’s design is lightweight and well-balanced for comfortable, prolonged wear.
Heat and moisture reduction: The centrally-located exhalation valve helps reduce the build-up of heat and moisture, which is especially helpful in hot, humid conditions.
Low profile: Its streamlined profile provides a wide field of peripheral vision.
Adjustable harness: The head harness features easy-to-tighten straps to ensure a proper fit for a wide range of head shapes and sizes.
Hygienic storage: The mask comes with a resealable bag for hygienic storage and transport.
AVAILABILITY: In stock
MTN Waterbased 100 har alt som gjorde suksessen til WB400 men nå i miniatyrformat.
Giftfri, lett og svært enkel i bruk, MTN Waterbased 100 er ideell for workshops og kunst maling med barn. Størrelsen passer perfekt inn i deres hender. Men bruken stopper ikke der; disse boksene er også godt egnet for artister, fagfolk og DIY entusiaster som ønsker å bruke en liten mengde maling og unngå å fylle sine hyller med halvtomme bokser.
* Sikkerhetsdatablad og mer info på Norsk finner du her: MTN WB-100ml MSDS
* Mer info og detaljer her eller i produkt beskrivelsen under: MTN Waterbased 100ml
AVAILABILITY: In stock
400ml sprayboks – innendørs og utendørs vann-basert akryl matt maling; variabelt / lav (MTN94 system) trykk for optimal kontroll og enklest mulig bruk.
Vask bort flekker og søl innen 20 minutter med varmt vann og såpe. 100% permanent og vannavstøtende etter å ha tørket.
Tilgjengelig i 91 farger, matt finish.
Tips: ikke la dysene være igjen på boksene etter bruk. Snu boksen opp ned og trykk på dysen til det er bare gass som kommer ut. Dette gjør at dysen varer lengre og ikke tetter seg etter bruk.
- OBS – Det er anbefalt å ikke legge til mer enn 10 forskjellige farger i handlekurven av gangen.
* Material Safety Sheet – HERE
* Technical Data Sheet – HERE
AVAILABILITY: In stock
Radex FFP2 støvmaske uten ventil gir effektiv beskyttelse mot støv, partikler og aerosoler. Ideell for bygg, industri og verksted. Komfortabel maske med høy filtrering for krevende arbeidsmiljøer. Farge: hvit.
AVAILABILITY: In stock
• Shoulder bag is made of 600D polyester with waterproof backing.
• 4cm wide removable shoulder-strap.
• Main compartment can be closed with zipper.
• 2 Slide pocket in flap can be closed with Velcro.
• There are 2 slide pockets for caps in side of bag.
Size: 43,50 × 26,50 x 22cm, approx. 27 liter capacity.
Reason to use:
Holds 18 spray cans; bag is discrete black; can be closed with zipper and has hand carry straps.
AVAILABILITY: In stock
MTN Kids Apron er perfekt tilpasset barn. (6-9 størrelsen passer også selvfølgelig på yngre kunstnere)
AVAILABILITY: In stock
Quick drying water-based varnish in a glossy or matte finish with excellent characteristics, designed to protect and even out the finish of artistic murals, both outdoors and indoors. Thanks to its UV filter, it significantly increases the life span of the outdoor murals exposed to the sun.
We recommend diluting the product with 5-15% water depending on the type of application after carrying out a previous test on your surface to check that the product is suitable for your requirements. Its yield is 15 m²/l.
* View MTN Mural Technical Data Sheet HERE
* View MTN Mural Material Safety Sheet HERE
AVAILABILITY: In stock
- Velegnet til merking, midlertidig forsegling/bunting og maskering.
- Etterlater ikke spor ved kortvarig bruk.
- Er vannfast og kleber til alle slags underlag.
«Maskeringstape fra Rajapack er allsidig og har mange bruksområder.
Praktisk: maskeringstapen kleber til alle slags underlag, er vannfast og tåler opptil +60˚C i inntil 30 minutter. Rives av for hånd.
Allsidig: Maskeringstapen er velegnet til merking av metall- og plastdeler, maskering før maling, overflatebeskyttelse eller til bunting av lettere gjenstander. Maskeringstapen etterlater ikke spor ved kortvarig bruk inntil 24 timer.
Tykkelse: 0,12 mmKlebeevne: 1,7 N/cm (gummibasert lim) Elastisitet: 8,5 %»
– Velg ønsket størrelse under – 19mm x 50m, 25mm x 50m, eller 50mm x 50m
AVAILABILITY: In stock
Mr. Serious Nylon glove with PU coating on palm and finger tips – Black, i størrelser S, M, L, og XL.
«These are the perfect gloves for painting! Mr. Serious Gloves are made of sturdy nylon and feature a special polyurethane coating on the palm as well as on the finger tips.
Therefore you are not only keeping your hands clean while painting, but rather having great grip as well as the guarantee of not leaving any fingerprints behind. Moreover your hands are better ventilated than with conventional gloves which works nicely against the origin of sweat. Not only for this reason Mr. Serious Gloves are multi-reusable.»
Clean hands, no fingerprints left behind, strong, good grip, non sweaty, reusable; these gloves are a sure winner.
AVAILABILITY: In stock
3M 5925 erstatnings filtre (2 stykker) til bruk med 3M 6000 og 7000 masker. P2 beskyttelse mot partikler og støv, samt begrenset beskyttelse mot gass (A1).
* Godkjenning: P2; Normalisation EN 143.
AVAILABILITY: In stock
The MTN Tool Belt is a utility belt specially designed to hold spray cans. Although its pockets are designed for 400ml cans, they also work for other formats of aerosols. In addition, the belt has two different sized accessory pockets in which to store your belongings, like your cell phone or keys, and other tools such as markers or caps. It’s made of 500 cordura resin and 40 mm polypropylene tape, with a trident buckle and velcro closure.
Characteristics
Space for 4 sprays
Accessory pocket of 6 x 13 cm
18 x 13 cm accessory pocket
Made of resin sanity 500
40mm polypropylene tape
40mm trident buckle closure
20mm Velcro
AVAILABILITY: In stock
Mr. Serious ‘PU coated winter gloves’
These gloves are painting gloves like we are used to but with ‘terry liner’ to keep hands warm, even in sub zero conditions. Tilgjengelig i størrelser L, og XL.
AVAILABILITY: In stock
«The fable of “The Ant and the Grasshopper” told us that in summer you have to prepare for the arrival of winter. And that’s what we do.
We present a version of our gloves for for the coldest months: the MTN PRO Gloves – Winter. Apparel especially designed to protect your hands from the cold and rain, as well as protecting them from paint stains.»
AVAILABILITY: In stock
Et par sorte engangshansker av sterk nitril i høy kvalitet, uten latex og silikon. L Størrelse passer de fleste.
AVAILABILITY: In stock
Spray can backpack ready for action.
• Metro backpack is made of 500D polyester with waterproof backing.
• Main compartment and front pocket can be closed with zipper.
• Back-panel, bottom and shoulder-straps are padded.
• Big carry handle on top.
• Size: 30 x 40 x 21cm, 25 liter capacity.
Reason to use:
Holds 12 spray cans in carton boxes, and another 12 spray cans can be stacked on top.
Also the front pocket fits 3 spray cans.
That’s 27 spray cans in one backpack!
AVAILABILITY: In stock
Introducing an accessory that is more useful than it sounds: being able to use an aerosol as if it were a paint spray gun avoids finger fatigue on large format projects. Plus, it also helps avoid stains on your clothes and body by keeping the spray can a little further away from you.
Sprayhandle
Recommended for applying aerosol products in a comfortable and clean way. Although we are not in favor of guns, this is the product closest to one, for this reason, the yellowness of it will help you not to have any problems of this type.
Instructions for use:
Attach the gun holder to the neck of the spray can by pushing horizontally. Before use, pull the trigger so that the aerosol lets out a little gas. Do not point it at yourself.
Attention:
When attaching or removing the accessory, do not apply force at an angle as the holder may break.
* Technical Sheet – Check here
AVAILABILITY: In stock