Spraylakk Mag nr. 6
199,00 kr inkl. mva
Ny Spraylakk blad nummer 6 i veldig begrenset opplag (kun 50 stykker trykket) – hvert blad er nummerert og følger med 10+ klistremerker.
48 sider med masse fett du ikke har sett andre steder. Løp og støtt!
5 på lager
| Vekt | 0,25 kg |
|---|
Født fra et Norsk-Spansk samarbeid kommer Mini Spots skissebok. Mye spennende for pengene her.
40 sider med høy fotokvalitet fullstørrelse bilder; flere typer fete spots for at dine skisser kan komme til livet.
Størrelse: A5 -format.
Papir: 170gr – 40 sider
(begrenset antall) Bonus levert med hver bestilling: 2 klistremerker, og en ekstra customizable Thank You papp flyer.
Husk å sjekke ut https://www.instagram.com/mini.spots/ (@mini.spots for featuring)
AVAILABILITY: In stock
2001. After a decade of railway graffiti, Opak and the SDK crew stop painting trains in France, caught up in the legal system. Twelve years later, SNCF accelerates the scrapping of the country’s most beautiful trains and officially announces the death of the famous “petits gris.” That’s the trigger—Opak goes on a quest to paint all these legendary trains one last time. In the form of a logbook, Olivier Scuro reveals in the first volume of Painted Graves the details of this adventure and its origins in the 1990s, through numerous archive photos showcasing the works of Opak, Inxs, Honet, Pum, Fancie, Riot, Sime, Milk, Poes, Chill, Acid79, Skeme—to name just a few. A bit of urbex and adrenaline, some nostalgia… and above all, a lot of graffiti.
• Sabotage Editions | ISBN : 9791097946302
• 300 pages
• Texts in English and French
• Format: 21×27 cm
• Hardcover binding
AVAILABILITY: In stock
2001. After a decade of railway graffiti, Opak and the SDK crew stop painting trains in France, caught up in the legal system. Twelve years later, SNCF accelerates the scrapping of the country’s most beautiful trains and officially announces the death of the famous “petits gris.” That’s the trigger—Opak goes on a quest to paint all these legendary trains one last time. In the form of a logbook, Olivier Scuro reveals in the first volume of Painted Graves the details of this adventure and its origins in the 1990s . At the time, the most talented graffiti writers from the international scene join them on their missions. Among them, Risk (Finland), Stone (France), Remo (Switzerland), Math (Netherlands), Nesh (Austria), Choc (Belgium), Ruzd (Germany), and Aone (USA)… All passed away at the height of their passion. In Painted Graves Volume 2, Olivier Scuro keeps digging into graffiti archives and pays tribute to friends lost too soon: travels, flashbacks, and the quest that comes to an end. Most of these trains—painted or not—have now disappeared as well. 248 pages featuring Opak, Risk, Stone, Remo, Math, Nesh, Choc, Ruzd and Aone, but also Kaos, Micro, Lyte, Sharp, Rough, Jiwee, Inxs, Pum, Honet, Riot, Foe, Vino…
• Sabotage Editions | ISBN : 9791097946319
• 248 pages
• Texts in English and French
• Format: 21×27 cm
• Hardcover binding
AVAILABILITY: In stock
«All four of our Night Quill actuators (Soft Touch, Medium Touch, Hard Touch, and Low Rider) in a discounted 4-pack.»
AVAILABILITY: In stock
THE WORLDS WIDEST CAP!
HYDRA (Version 2) is the new standard in ULTRA wide caps. Specifically designed for high pressure cans like Mad Maxxx, Ultra wide, Turbo 750ml and Booster 600ml spray cans.
The cap fits 4mm male valves such as ultra wide cans (Mad Maxx/Ultra Wide/Booster) etc.
Get your fill done 4 times faster.
Coverage: 50-95 cm wide with even coverage.
* This product is solvent resistant and designed to be re used 100’s of times after cleaning.
Please note “HYDRA” does not come with a spigot as it is NOT compatible with female cans.
AVAILABILITY: In stock
Erstatningstupper til bruk med POSCA PC-3M og Uni Paint PX-21 tusjene.
Pakke med 3 stykker.
AVAILABILITY: In stock
«Bright anti-corrosion spray paint.
High coverage and insulating, it is composed of high quality resins and pigments, as well as rust inhibiting agents.
This format (400ml) is available in black, white and green.
It can be used both indoors and outdoors and is suitable for all rusted or bare metal surfaces.»
AVAILABILITY: In stock
«VORTEX HALO female cap is like no other cap and produces the worlds largest hollow cone spray pattern with a width ranging from 5-35cm. Move 3.5 X faster than any other round fat cap on the market to get any artwork done quicker.
Only suitable with high pressure cans and is recommended for 750ml male spray paint such as Madmaxx, Ultrawide, etc.
Compatible on all European male high pressure valves.
- Not suitable for use with any adapters.
- Vortex Halo needs to be cleaned between use for the best outcome by soaking in acetone or solvent liquid. For ease of cleaning we suggest a solvent cleaning can and to turn upside down and clear with the cans gas.
- Note- Weather and temperature will directly effect the pressure of a can and some low temperatures below 15 degrees Celsius may cause mixed results depending on the brand of paint used.
Easy to clean with any solvent based liquid and is reusable.»
- Not compatible with adapters or low pressure cans.
AVAILABILITY: In stock
New York writer and artist Craig KR Costello, founder of the KRINK brand, became known for his famous giant fire extinguisher tags. He thus popularized a movement that is still carried on today by the most radical writers.
The KRINK Mini Sprayer is a compact version of a pump sprayer: an object as aesthetic as it is formidable, for tag extremists as well as for collectors, who will all appreciate the quality and level of finish of the product, which has made it famous. of KRINK and its founder.
• Very handy: can be used with one hand.
• Precisely regulated pressure thanks to the hand pump.
• Adjustable tip to achieve the desired line.
• Dimensions: height: 36 cm, diameter: 13 cm.
• Capacity: 2 liters.
Delivered empty. To be filled with the paint of your choice, or with ink for maximum drips.
Instructions:
1. Recommended acrylic paint: thins and cleans up with water. Recommended starting mix: 1 part paint, 1.5 parts water. To be adjusted later.
2. Mix outside of the Mini Sprayer, for example in a bucket.
3. Fill the Mini Sprayer by passing the mixture through a mesh flirt (eg tights) to avoid possible clumps and other impurities that could clog the nozzle.
4. Close the container tightly.
5. Pump until resistance is felt on the handle. A slight hiss may escape.
6. Point nozzle at surface to be painted and squeeze handle to release paint. Turn the tip in small increments to adjust the line. If the flow is not uniform: dilute the mixture a little more with water.
To maintain an even pressure: continue pumping between sprays.
Between uses: pull the red valve to release the pressure.
Important: keep all components clean. Wash the inside of the Mini Sprayer and the outside after each use. Rinse all the parts under an abundant flow of water to remove all traces of paint, in particular the tube and the nozzle, in order to eliminate small bits of dried paint which could clog the Mini Sprayer.
AVAILABILITY: In stock
«Sometimes, in the pursuit to yield better results from a product and increase its overall quality, companies are required to increase costs. This generally leads to a raise in product price at the final point of sale. This however is not the case when we talk about MTN’s new product, MTN Street Ink. It has been specially formulated and developed in our labs, MTN Basics, with the concept of keeping cost minimized whilst maintaining a quality that meets the demands of our customers.
MTN Street INK Characteristics:
– Maximum opacity
– Excellent UV and scratch resistance
– Interior and exterior use (low odor)
– Very resistant against most solvents
To complete our launch, we will be utilizing the empty dabbers in 30ml and 90 ml’s, to present our newest models, which will now come filled with Street Ink. These Dabbers are the best tools for these inks due to their excellent flow control and flexible body, along with the best nib/ tip of it’s type on the market.»
1000ml, kan brukes i alle typer tusj og squeezer; anbefalt å bruke med MTN Dabbers.
AVAILABILITY: In stock
Single-layer high temperature acrylic black paint in aerosol.
Ultra-resistant to high temperatures (350 ° C), it is made of polybutylene resins and heat-stable lead titan-ate pigments.
It can be used both indoors and outdoors and is suitable for all heat resistant substrates.
AVAILABILITY: In stock
Product formulated with oils, solvents and additives. Great penetration, lubrication and protection of metals against corrosion. Very good results in loosening of metal parts. Displaces moisture to effectively prevent short circuits and help start engines. Can access hard to reach areas thanks to its long diffusor tip. Compatible with all kinds of oils and greases.
AVAILABILITY: In stock
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
AVAILABILITY: In stock
«Lightning is our widest male cap with a range from 20cm -65cm width using female cans.
For the best output it is recommended to use high pressure cans.
Wider, faster, with comfort to get your painting done in half the time. Premium engineer grade plastic and re useable. The design and comfort are 2nd to none and offer an unparalleled experience.
Cleans easily in acetone and regular solvent.»
* This product is solvent resistant and designed to be reused and cleaned.
AVAILABILITY: In stock
«HEAVY DART is our medium fat cap designed for both female and male cans with low to high pressure.
This cap fits all popular female cans and comes with a detachable spigot (stem) that allows it to fit onto cans which have a 4mm wide spigot (such as MTN Madmaxx).
This cap has a perfectly round dot with fast output and ability to flare making it extremely versatile.
The extended profile allows you to get into tighter spots with more accuracy and offers extreme control via our original design.»
- This product is solvent resistant and designed to be cleaned and reused.
AVAILABILITY: In stock