3M 4255+ A2-P3 Gassmaske
599,00 kr inkl. mva
3M™ Reusable Half Mask 4255+ (FFA2P3 R D)
The 3M™ Reusable Half Mask 4255+ is a ready-to-use, maintenance-free respirator designed for effective and comfortable protection against organic gases and vapors, as well as hazardous particulates like those from spray paint. Its integrated cartridges and filters offer combined protection in a single, lightweight unit.
Conforms to European norm EN 405:2001+A1:2009.
Protection rating: The mask provides FFA2P3 R D protection.
A2: Protects against organic gases and vapors (with a boiling point over 65°C), such as those from solvent-based paints, adhesives, and cleaning detergents, up to 10 times the occupational exposure limit (or 5000 parts per million, whichever is lower).
P3: Offers protection against high levels of fine dust and water- or oil-based mists. This provides high filtration efficiency (99%) against airborne particulates.
R: Signifies the mask is reusable.
D: Indicates it has passed the optional Dolomite dust clogging test, which means it resists clogging under dusty conditions.
Integrated design: The filters and cartridges are integrated into the facepiece, meaning no assembly or maintenance is required before use.
Breathing comfort: A new, enhanced valve assembly helps reduce breathing resistance during exhalation, making it easier to breathe.
Silicone-free face seal: The textured face seal is soft, non-allergenic, and silicone-free for a comfortable fit.
Lightweight and balanced: The mask’s design is lightweight and well-balanced for comfortable, prolonged wear.
Heat and moisture reduction: The centrally-located exhalation valve helps reduce the build-up of heat and moisture, which is especially helpful in hot, humid conditions.
Low profile: Its streamlined profile provides a wide field of peripheral vision.
Adjustable harness: The head harness features easy-to-tighten straps to ensure a proper fit for a wide range of head shapes and sizes.
Hygienic storage: The mask comes with a resealable bag for hygienic storage and transport.
15 på lager
The 3M 4255+ is suitable for various applications where protection against organic vapors and particulates is needed, including:
Spray painting, brush, and roller painting;
Sanding (both manual and with power tools);
Working with solvent-based glues and adhesives;
Working with weed killers and pesticides;
General cleaning (using solvent-based cleaners)
| Vekt | 0,5 kg |
|---|
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
AVAILABILITY: In stock
«The fable of “The Ant and the Grasshopper” told us that in summer you have to prepare for the arrival of winter. And that’s what we do.
We present a version of our gloves for for the coldest months: the MTN PRO Gloves – Winter. Apparel especially designed to protect your hands from the cold and rain, as well as protecting them from paint stains.»
AVAILABILITY: In stock
The MTN WEPRO Multi-Surface Primer is a primer spray that also works as a final coat. The primer enhances the adherence of paint to glossy surfaces – from plastics such as rigid PVC and methacrylate to metals such as aluminum, copper or zinc; as well as other materials such as glass, ceramic and tiles. This versatile product can also be used as a finishing paint, as it can be later enameled or varnished.
– White
– Anti-rust prevention
– Fast drying
– Resistant to temperatures of up to 100 ºC
– Strong adhesion to any Surface
– Indoor and outdoor use
AVAILABILITY: In stock
• Shoulder bag is made of 600D polyester with waterproof backing.
• 4cm wide removable shoulder-strap.
• Main compartment can be closed with zipper.
• 2 Slide pocket in flap can be closed with Velcro.
• There are 2 slide pockets for caps in side of bag.
Size: 43,50 × 26,50 x 22cm, approx. 27 liter capacity.
Reason to use:
Holds 18 spray cans; bag is discrete black; can be closed with zipper and has hand carry straps.
AVAILABILITY: In stock
The ELIPSE P3 R filters carry the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron.
It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry.»
> Approved to European Standard EN140: 1998. APF 20; BS EN143: 2000/A1 P3 (R D)
> Elipse twin filters
> Product code: SPR316
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
«The GVS ELIPSE A1P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Product code: SPR341
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
Full svart engangs kjeledress i forsterket ikke-vevd polypropylene, den ideelle beskyttelsen for strukturarbeid og skittent arbeid.
• Glidelås foran.
• MTN-logo på baksiden.
• Elastikk ved hetten, midjen, håndleddene og anklene: maksimal beskyttelse mot all maling eller andre flekker på klær eller hår.
• Individuell emballasje med strekkode.
AVAILABILITY: In stock
- Velegnet til merking, midlertidig forsegling/bunting og maskering.
- Etterlater ikke spor ved kortvarig bruk.
- Er vannfast og kleber til alle slags underlag.
«Maskeringstape fra Rajapack er allsidig og har mange bruksområder.
Praktisk: maskeringstapen kleber til alle slags underlag, er vannfast og tåler opptil +60˚C i inntil 30 minutter. Rives av for hånd.
Allsidig: Maskeringstapen er velegnet til merking av metall- og plastdeler, maskering før maling, overflatebeskyttelse eller til bunting av lettere gjenstander. Maskeringstapen etterlater ikke spor ved kortvarig bruk inntil 24 timer.
Tykkelse: 0,12 mmKlebeevne: 1,7 N/cm (gummibasert lim) Elastisitet: 8,5 %»
– Velg ønsket størrelse under – 19mm x 50m, 25mm x 50m, eller 50mm x 50m
AVAILABILITY: In stock
«The GVS ELIPSE A2P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of up to 5000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140 : 1998, EN 405, EN14387 RD+A2 With P3 APF: 40. With Gas or Gas A2+P3: 20.
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
MTN WEPRO Solvent Cleaner is a mix of universal solvents suitable for cleaning fresh paint stains on non-porous surfaces. Its rapid evaporation and high degreasing power also provides degreasing properties. It also works as a cleaner for oily and greasy liquids.
It is used to prepare surfaces before being painted as well as to clean painter’s brushes and rollers in a fast and convenient way. For dried paints, greater quantities of the product will be necessary. Very useful for cleaning and unclogging blocked paint spray nozzles by placing them on the solvent spray valve and pressing until clear.
* Complete technical data sheet here: MTN WEPRO SOLVENT
AVAILABILITY: In stock
• Shoulder bag is made of 600D polyester with waterproof backing.
• 4cm wide removable shoulder-strap.
• Main compartment can be closed with zipper.
• Slide pocket in flap can be closed with velcro.
• There are 2 slide pockets for caps in side of bag.
Size: 31 × 26,5 x 22cm, 19 liter capacity.
Reason to use:
Holds 12 spray cans; bag is discrete black; can be closed with zipper and has hand carry straps.
AVAILABILITY: In stock
The Mr. Serious 18-pack bag holds enough cans for a big sized production.
• Non woven fabric.
• Strong 4cm handles.
• Fits 18 spray cans.
• Size: 43,5 × 26,5 x 22cm.
• 2 slide pockets in flap and 6 slide pockets for caps in bag.
Reason to use:
Holds enough cans for a big sized production, cans won’t tip over if cardboard boxes are used, bag is discrete in matt black, can be closed with zip, reusable.
AVAILABILITY: In stock